Rhino Se10 Parts Manual Gearbox lube specs for rhino bush hog rotary cutter - Gearbox Gearbox lube specs for rhino bush hog rotary cutter. Saginaw steering gearbox. User manual for the device Servis-Rhino Lawn Mower SE10-4A. Online user manual database.

1. Rhino Se10 Parts Manual
2. Online Parts Manual
3. Ford Parts Manual

If looking through the Servis-Rhino SE10-4A user manual directly on this website is not convenient for you, there are two possible solutions: Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode.

At Quality Farm Supply, we believe you should be able to get the rotary cutter parts you need when you need them. That is why we offer a wide selection of rotary cutter replacement parts to meet any need.

We offer a variety of rotary cutter blades, rotary cutter blade bolts and blade bolt kits, rotary cutter tail wheels and parts, CV drivelines for flex wing mowers, and rotary cutter wing shafts. When you shop with Quality Farm Supply, you can be confident that we have the rotary cutter replacement parts you need with our huge selection of rotary cutter parts.

. READ, UNDERSTAND, and FOLLOW the Safety and Operation Instructions contained in this manual before operating the equipment. RHINO ® 1020 S. Sangamon Ave. Gibson City, IL 60936 800-446-5158 Email: parts@servis-rhino.com SR10M/SR15M FLEX-WING MECHANICAL LEVEL LIFT ROTARY CUTTER/SHREDDER © 2004 Alamo Group Inc.

00759799C $0.00. TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. In order to reduce accidents and enhance the safe operation of mowers, Alamo Group Ag Division, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book.

The video will familiarize and instruct mower-tractor operators in safe practices when using industrial and agricultural mowing equipment. Alamo Group Ag. Division is willing to provide one (1) AEM Mower Safety Practices Video Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video DVD Format – AEM/FEMA Mower Operator Safety Video Mower Operator’s Manual AEM Mower Operator’s Safety Manual Requester Name: Requester Address: City. SAFETY SECTION. 1-1 Safety Information.

1-2 Decal Location. 1-13 Federal Laws & Regulations. 1-18 INTRODUCTION SECTION. 2-1 ASSEMBLY SECTION. 3-1 Blade Carrier Attachment.

3-2 Tongue Attachment. 3-3 Center Axle Attachment.

3-3 Level Rod Attachment. SAFETY SECTION Safety Section 1-1. A safe and careful operator is the best operator. Manufacturer and should be to the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions.

The first section of this manual includes a list of Safety Messages that, if followed, will help protect the operator and bystanders from injury or death. READ UNDERSTAND, and Messages. Serious injury or death may occur unless care is taken to follow the warnings and instructions stated in the Safety Messages. Always use good common sense to avoid hazards. Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medidas de seguridad. Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death.

Never allow children to operate or ride on the Tractor or Implement. Do not mount the Tractor while the tractor is moving. Mount the Tractor only when the Tractor and all moving parts are completely stopped.

The operator and all support personnel should wear hard hats, safety shoes, safety glasses, and proper hearing protection at all times for protection from injury including injury from items thrown by the equipment. PROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE PER- MANENT HEARING LOSS! Tractors with or without an Imple- ment attached can often be noisy enough to cause permanent hearing loss. Never attempt to lubricate, adjust, or remove material from the Implement while it is in motion or while tractor engine is running.

Make sure the tractor engine is off before working on the Implement! (SG-20) WARNING! Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. NEVER use drugs or alcohol immediately before or while operating the Tractor and Implement. Drugs and alcohol will affect an operator’s alertness and coordination and therefore affect the operator’s ability to operate the equipment safely. Implement, an operator on prescription or over-the-counter medication must consult a medical professional regarding any side effects of the medication that would hinder their ability to operate the Equipment safely.

Extreme care should be taken when operating near loose objects such as gravel, rocks, wire, and other debris. Inspect the area before mowing. Foreign objects should be removed from the site to prevent machine damage and/or bodily injury or even death. Any objects that cannot be removed must be clearly marked and carefully avoided by the operator.

Avoid mowing in the reverse direction when possible. Make sure there are no persons behind the mower and use extreme care when mowing in reverse. Mow only at a slow ground speed where you can safely operate and control the Tractor and Mower.

Never mow an area in the reverse direction that you have not inspected and removed debris or foreign material. Use extreme care when lowering or unfolding the implement’s wings. Make sure no bystanders are close by or underneath the wings. Allow ample clearance around the implement when folding or unfolding the wings. Use extreme caution around buildings or overhead power lines.

To prevent tipping of implement when stored in folded position, use carrying wheels or adequate stands on center frame. Never unhitch without using the Tongue Jack. The Tongue is very heavy. Attempting to lift the Tongue without using the Tongue Jack could cause strains or other injury.

Allowing the tongue to fall suddenly and unexpectedly could result in crushing injury. Use the Tongue Jack for lifting the mower only. SAFETY PARTS INFORMATION Servis-Rhino mowers use balanced and matched system components for blade carriers, blades, cuttershafts, knives, knife hangers, rollers, drivetrain components, and bearings. These parts are made and tested to Servis-Rhino specifications. Non-genuine 'will fit' parts do not consistently meet these specifications. The use of “will fit”.

SR15 10/01 © 2004 Alamo Group Inc. SAFETY NOTE: Rhino supplies safety decals on this product to promote safe operation. Damage to the decals may occur while in shipping, use, or reconditioning.

Rhino cares about the safety of its customers, operators, and bystanders, and will replace the safety decals on this product in the field, free of charge (Some shipping and handling charges may. 1(0) INSTRUCT CW Blade Rotation LOGO RHINO (4-7/8 x 6-1/2) L.NAME RHINO (4-3/8 x 16-3/4) for RHINO Flexes L.NAME RHINO (2 x 7-3/8) NAME SR15M NAME SR10M SER. PLT SR15M INSTRUCT 5-Year Gearbox INSTRUCT 2-Year Driveline INSTRUCT Operators Manual Inside. SAFETY 1 -00725746 2 -00753840 3 -00756004 5 -00769736 4 -00756005 6 -00756059 R 8-31-92 SR15 10/01 Safety Section 1-15 © 2004 Alamo Group Inc. 7 -00769737 9 -00760657 12 -D103 SR15 10-01 © 2004 Alamo Group Inc. SAFETY 10 -02967827 FRONT COVER 13 -03200347 SMV REFLECTOR 14 -99203 RED REFLECTOR 12 -D114 15 -99204 YELLOW REFLECTOR Safety Section 1-16 8 -00756494.

SAFETY 18 -D102 26 -00771283 22-D303 21-D302 19 -D137 20 -D138 24 -00757157 NAME (SR 15) 23 -6719 NAME (SR 10) 25 -SERIAL PLATE 27 - 00776481 33- 00773723 SR15 10/01. FEDERAL LAWS AND REGULATIONS This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators.

This section is not intended as a legal interpretation of the law and should not be considered as such. INTRODUCTION SECTION Introduction Section 2-1.

Your medium-duty Cutter is designed primarily for weed, grass, and brush to 3' diameter. With proper maintenance as described in this manual, your Cutter will provide you with years of dependable service with a minimum of repairs. It is recommended that all operators of this implement read this manual or be instructed of its contents as to safety, proper operation, and maintenance before beginning operation. ASSEMBLY SECTION Assembly Section 3-1.

Rhino Se10 Parts Manual

To insure proper installation, check to see that Blade cutting surfaces are correct for counterclockwise rotation on the Center Section and on the Right Wing Blade Carrier. (Clockwise on Left Wing) SR10M/SR15M 10-01 © 2004 Alamo Group Inc. CENTER AXLE ATTACHMENT- LEVEL LIFT & NON LEVEL LIFT Install Center Axle (1) to lugs (2) at rear of Center Section with (2) 1' x 7' lg. Bolts (3), and locknuts (4). Axle Attachment SR10M/SR15M 10-01 Assembly Section 3-3 © 2004 Alamo Group Inc. Tractor Drawbar. This Adjustment will keep Clevis level as mower is raised and lowered as long as weight of mower is resting on Clevis, and all components are in good condition.

TONGUE HITCH CONTROL ROD DRAWBAR CLEVIS SR10M/SR15M 10-01 Assembly Section 3-4 © 2004 Alamo Group Inc. Attach the Wing Axles (1) to the Wing Sections (2) with 1 x 7 bolts (3), flatwashers (4), and locknuts (5) on outboard side and 1 x 4-3/4 bolt (6), and locknuts (5) on the inboard side. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. SERIOUS BODILY INJURY.

Do not exceed 20 M.P.H. On Airplane or Rib Implement Tires. Maximum airplane tire inflation pressure is 50 PSI, minimum inflation pressure is 20 PSI. Inflate ribbed implement tires to manufacturer rated PSI as shown on the tire sidewall. SR10M/SR15M 10-01 Assembly Section 3-6 © 2004 Alamo Group Inc.

ASSEMBLY FIGURE 8. Wheel Attachment Decal for Airplane tire Only.

SR10M/SR15M 10-01 Assembly Section 3-7 © 2004 Alamo Group Inc. Install the clevis rod of the 8' stroke Hydraulic Cylinder to the lug on the Center Axle. The clevis base fastens to the lug or Spring Assembly on the Center Section. Center Axle Hydraulic Cylinder Attachment SR10M/SR15M 10-01 © 2004 Alamo Group Inc. SERIOUS BODILY INJURY or DEATH.

Without weight. Do not fold wing. Attach transport strap securely to prevent inadvertent dropping from the transport position and possible CRUSHING INJURY or DEATH. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. Deflector to the Center Section and Wing Sections with bolts (1) and locknuts (3). REAR CENTER SECTION FIGURE 15.

Rear Chainguards Attachment (Extra) SR10M/SR15M 10-01 © 2004 Alamo Group Inc. ASSEMBLY FIGURE 14. Front Deflectors (Standard) REAR RIGHT WING SECTION. Wing Driveline Clutch End Attachment WING DRIVELINE CLAMP COLLAR END FIGURE 17. Wing Driveline Clamp Collar End Attachment SR10M/SR15M 10-01 © 2004 Alamo Group Inc.

ASSEMBLY DIVIDER GEARBOX MAIN DRIVELINE NOTE: Wing Gearbox Shield must be in place and lowered to guard connecting yokes and clutches. MOUNT IN THIS HOLE FOR 1000 MOUNT IN THIS HOLE FOR 540 Attach bearingsupport weldment (ref #1) to torque weldment as shown. Install jackshaft bearing (ref #2) onto jackshaft stub end. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. ASSEMBLY YOKE OPERATING 11/16'. Cylinder Hoses to the same side of the Control Valve as the Cylinder are on the Mower rather than crossing the Hoses. Route hoses through front and rear hose brackets.

Remove plastic plug from Breather of Cylinder before operation. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. ASSEMBLY (540 RPM 1-3/8'-6). OPERATION SECTION Operation Section 4-1.

(5.1) Connecting the Mower Tongue to the Tractor.4-11 (5.2) Connecting Mower Hydraulic Lines to the Tractor.4-12 (6) SETTING THE MOWER.4-13 (6.1) Setting Deck Height.4-13 (6.2) Setting Deck Pitch.4-14 SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Operation Section 4-2 R 09-16-02. Safety Messages. Always use good common sense to avoid hazards. (SG-2) PELIGRO!

Si no lee Ingles, pida ayuda a alguien que si lo lea para que le traduzca las medias de seguridad SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (SG-3) Operation Section 4-3!LEA EL. Replaceable Skid Shoes. Standard.Safety Deflectors are standard equipment. Single and double chain guards are available as extra equipment at extra cost. Servis-Rhino recommends mowers be equipped with deflectors or double chain guards for all mowing purposes.

Single chain guards may be used for agriculture purposes only and are specifically not recommended for highway, right-of-way, parks or greenbelt mowing. Serious injury or death to the operator or others could result if the operator is under the influence of drugs or alcohol. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Drugs and alcohol will affect an. Operating the mower with a tractor that does not have adequate power may damage the tractor engine. Exceeding 100 HP for a 540 RPM drive and 140 HP for a 1000 RPM drive may cause mower damage by overpowering the unit in heavy cutting conditions.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION PTO master shield 540 RPM Unit - 100 HP. Pintle Hook Hitch-Optional Equipment Drawbar length must be modified to obtain dimension 'A' (CV Driveline = 17' ± 2', Standard Driveline = 19” ± 2' ). SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Tractor Drawbar Length (Based on Mower Operating Speed) 14'. Mower blades driving the Tractor transmission even though the Tractor clutch has been engaged.

Install an over running clutch between the Tractor PTO and the Mower driveline to prevent this potentially dangerous situation. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. Never leave the seat until the tractor, its engine and all moving mower parts are completely stopped. SR10M/SR15M 10-01 © 2004 Alamo Group Inc.

OPERATION Tire Spacing Minimum Width 60”. Start the Tractor only when properly seated in the Tractor seat.

Starting a Tractor in gear can result in injury or death. Read the Tractor operator’s manual for proper starting instructions. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (SG-9). Adjust length as necessary and allow only enough slack in the chain to make a maximum turn in both directions. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. Ensure wings are entirely supported by the cylinders before removing the transport braces.

NEVER drive out bar pins and NEVER remove braces that have tension on them. SR10M/SR15M 10-01 Operation Section 4-12 © 2004 Alamo Group Inc. Place split collar assemblies on the center axle hydraulic cylinder rod to maintain a set cutting height each time the mower is raised and lowered. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Split Collar Assemblies. A driveline not attached correctly to the Tractor PTO shaft could slip off and result in personal injury and damage to the cutter.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. 1” clearance between each profile end and opposite profile universal joint. At its farthest operating extension, a minimum profile engagement of 12” must be maintained for a Constant Velocity (CV) tube type driveline and a minimum engagement of 6” for non-CV solid shaft drivelines.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (540 RPM 1-3/8'-6).

NOTE: If the driveline cannot be shortened and still maintain the required profile engagement, the operator must be made aware of terrain conditions and avoid situations which pose a potential problem to avoid damaging the driveline. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Driveline in maximum compressed position. Do not turn so sharp or lift mower so high to produce a severe 'knocking' of the Driveline which will cause accelerated wear and breakage of drive train components and could result in possible injury from the separated Driveline sections. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. Look for loose fasteners, worn or broken parts, and leaking or loose fittings.

Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this Implement in good working order. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (SRM-3).

Replace bent or broken blades with new blades. NEVER ATTEMPT TO STRAIGHTEN OR WELD ON BLADES SINCE THIS WILL LIKELY CRACK OR OTHERWISE DAMAGE THE BLADE WITH SUBSEQUENT FAILURE AND POSSIBLE SERIOUS INJURY FROM THROWN BLADES. (SGM-10) SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (SGM-3) Operation Section 4-19. Ensure the driveline slip clutches are properly adjusted and the friction plates are not frozen together. Reference the Maintenance Section for proper slip clutch maintenance.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Operation Section 4-20. Ensure carrier hub nuts are tightened with the cotter pin inserted and spread. Inspect the condition of the deck skid shoes and the skid shoe attaching hardware. SR10M/SR15M 10-01 © 2004 Alamo Group Inc.

OPERATION Operation Section 4-21. When operating in traffic, always use the Tractor’s flashing warning lights and reduce your speed. Traffic around you and watch out for the other guy. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION 1/2'.

Always disengage the tractor differential lock when turning. When engaged the differential lock will prevent or limit the tractor from turning. During normal cutting conditions, locking the differential provides no benefit and should not be used. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. Allow ample clearance around the implement when folding or unfolding the wings. Use extreme caution around buildings or overhead power lines.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Transport Lock Bars. Use extreme caution when operating on steep slopes. Keep the tractor in a low gear when going downhill. DO NOT coast or free-wheel downhill.

SR10M/SR15M 10-01 Operation Section 4-25 © 2004 Alamo Group Inc. Ground contact also produces a severe shock load on the mower drive and to the mower blades resulting in possible damage and premature wear. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION INCORRECT: DO NOT approach ditch straight on. Remove all foreign objects and debris.

If objects are too big to remove, mark them clearly and be sure to prevent the mower blades from contacting them. SR10M/SR15M 10-01 © 2004 Alamo Group Inc.

OPERATION (SGM-5). (This will also reduce power required to mow, reduce wear and tear on the Mower drivetrain, spread cut material better, eliminate streaking, and make the final cut more uniform.) SR10M/SR15M 10-01 © 2004 Alamo Group Inc. Normal ground speed range is from 2 to 5 mph.

Use slow mowing speeds when operating on or near steep slopes, ditches, drop-offs, overhead obstructions, power lines, or when debris and foreign objects are to be avoided. SR10M/SR15M 10-01 © 2004 Alamo Group Inc.Never allow clippings or debris to collect near drivelines, slip clutches, and gearboxes. Periodically shut down the Tractor and Mower and clean clippings and collected debris from the mower deck. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION ( S G M - 8 ).

Stay alert and watch for trees, low hanging limbs, power lines, and other overhead obstacles and solid ground objects while you are operating. Use care to avoid hitting these items SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (SRM-7) Operation Section 4-31. Cutting into the berm or edge of the ditch will cause abnormal and accelerated blade wear and possible blade component failure. Correct Mower Deck Positioning Wrong Mower Deck Positioning SR10M/SR15M 10-01 Operation Section 4-32 © 2004 Alamo Group Inc. SR10M/SR15M 10-01 Operation Section 4-33 © 2004 Alamo Group Inc. After the driveline has been removed from the tractor, place the PTO master shield back in the operating position.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (STI-4) Driveline Storage Bracket. If the mower has been exposed to such conditions, at the start of each mowing season, and any time it is suspected that the slip clutch plates may be frozen together, readjust the slip clutch as detailed in Seasonal Clutch Maintenance of the maintenance section in this manual. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. PTO, or if the tractor PTO has to be run to have hydraulic power, disconnect the mower driveline from the tractor PTO output shaft. Secure the driveline to the mower deck to prevent driveline damage or loss during transport.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION Operation Section 4-36. Maximum airplane tire inflation pressure is 50 PSI, minimum inflation pressure is 20 PSI. Inflate ribbed implement tires to manufacturer rated PSI as shown on the tire sidewall. DO NOT over-inflate. SR10M/SR15M 10-01 Operation Section 4-37 © 2004 Alamo Group Inc. SMV sign is clean and visible from the rear of the unit before transporting the tractor and mower on a public roadway.

Replace the SMV emblem if faded, damaged, or no longer reflective. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION (SG-10). Use caution and reduce speed if other vehicles or pedestrians are in the area. Reduce speed before turning or applying the brakes.

Ensure that both brake pedals are locked together when operating on public roads. SR10M/SR15M 10-01 Operation Section 4-39 © 2004 Alamo Group Inc.

If during transport a hard braking, sharp turning, or swerving action was performed, stop at the next safe location to inspect the security of the load. SR10M/SR15M 10-01 Operation Section 4-40.

TROUBLE SHOOTING GUIDE TROUBLE Excessive Vibrations Gearbox Overheating SR10M/SR15M 10-01 © 2004 Alamo Group Inc. OPERATION POSSIBLE CAUSE 1. Check gear box bolts. Check for loose nuts on bladeholder and blades. Check for bent output shaft. If shaft is bent, oil will normally leak from bottom seal. TROUBLE Gearbox Noisy Gearbox Leaking Clutch Slips Excessively Blade Wears Too Fast Hydraulic Cylinder Will Not Operate SR10M/SR15M 10-01 © 2004 Alamo Group Inc.

OPERATION TROUBLE SHOOTING POSSIBLE CAUSE 1. Worn bearing. Damaged oil seal. TROUBLE Oil Squirting from Breather Vent Hole Not Cutting Clean Streaking Conditions In Swath SR10M/SR15M 10-01 © 2004 Alamo Group Inc.

Online Parts Manual

OPERATION TROUBLE SHOOTING POSSIBLE CAUSE 1. Oil leaking by piston ring. (A small amount of leakage is normal) 2. Piston 'O' ring worn. MAINTENANCE SECTION Maintenance Section 5-1. Daily lubrication of the wing driveline slip joint is necessary. Failure to maintain proper lubrication will result in damage to U-joints, gearbox, and/or driveshaft.

WHEEL HUB ASSEMBLY Grease Weekly SR10M/SR15M 10-01 © 2004 Alamo Group Inc. MAINTENANCE ITEM The Wheel Hub Assemblies need to be lubricated on a weekly basis. Test Plug hole. The Test Plug on the Center Gearbox, Right & Left Wing Gearbox is located on the side of the Gearboxes.

Filler Plugs are located on top of all Gearboxes. Recommended lubricant for gearbox is NLGI 000 (P/N 00765444), with a capacity of four quarts.

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. U-Joint while trying to rotate the shaft on the other side of the U-Joint.

If there is noticeable movement in the Driveline replace the U-joint before it causes severe damage to the Driveline. GREASE EVERY 8 HOURS SR10M/SR15M 10-01 © 2004 Alamo Group Inc. MAINTENANCE Test Plug. Slide guard cone for double yoke over cam from the connecting end. Make sure holes for screws are visible. Broderson manuals. Tighten locking screws.

FIGURE 10 FIGURE 12 FIGURE 14 SR10M/SR15M 10-01 © 2004 Alamo Group Inc. MAINTENANCE FIGURE 9 Maintenance Section 5-5. Slide on the half shield. Turn the cone until it engages correctly. Install locking screws. FIGURE 17 FIGURE 18 SR10M/SR15M 10-01 Maintenance Section 5-6 © 2004 Alamo Group Inc. Original Blade Edge NOTE: Replace Blades in pairs after no more than 1/2' notch wear!

SR10M/SR15M 10-01 © 2004 Alamo Group Inc. MAINTENANCE (SGM-10) 1/2' MAXIMUM. Avoid personal injury. Blade and/or blade carrier removal should be done only with the tractor engine shut off, key removed, in neutral, parking brake on, PTO disengaged, and the cutter blocked in the raised position. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. SERIOUS BODILY INJURY. Do not exceed 20 M.P.H.

On Airplane or Rib Implement Tires. Maximum airplane tire inflation pressure is 50 PSI, minimum inflation pressure is 20 PSI. Inflate ribbed implement tires to manufacturer rated PSI as shown on the tire sidewall. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. MAINTENANCE Do not exceed 15 M.P.H. Center or Wing sections being set too low which allows the Wing Skid Shoes to drag on the ground.

Dragging the Skid Shoes on the ground or running the Skid Shoes into solid objects can contribute to early frame failure on the mower. Replace worn Skid Shoes as required. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. MAINTENANCE 1-9/16'.

NOTE: These values apply to fasteners as received from supplier, dry or when lubricated with normal engine oil. They do not apply if special graphited or molydisulphide greases or other extreme pressure lubricants are used. This applies to both UNF fine and UNC coarse threads.

SR10M/SR15M 10-01 Maintenance Section 5-11 © 2004 Alamo Group Inc. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. MAINTENANCE 20,21,22 FIGURE 22 Maintenance Section 5-12 29,30,31 ITEM DESCRIPTION Casing Bearing, Lower Output Seal, Lower Output Nut, Slotted Cotter Pin Shaft, Output Gear, Output Nut, Slotted Cotter Pin Bearing, Upper Output, Inner & Outer Input.

Install Output Shaft Bearing Adjusting nut (item # 10) Tighten Nut to set Pre-Load on Output Shaft Bearings. Bearing Preload should be from 12 to 14 inch pounds of Rolling Torque. SR10M/SR15M 10-01 © 2004 Alamo Group Inc. 20 minutes so oil will have time to seep down around Output Shaft bearings then finish filling with oil, This procedure may take longer on Cold days or Shorter on Hot days. Always recheck Oil Level after gearbox has been run approximately 1/2 hour. SR10M/SR15M 10-01 © 2004 Alamo Group Inc.

Ford Parts Manual

LIMITED WARRANTIES 1.01.Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser (“Purchaser”) that the goods purchased are free from defects in material or workmanship. A) Warranty is ONE-YEAR (12 MONTHS) for Seals (After one year, seals are considerd to be WEARING PARTS and replacment is the users' responsiblity.) B) Users' Gearboxes may be rebuilt by Servis-Rhino or replaced by new or rebuilt Gearboxes at the option of Servis-Rhino. SR10M/SR15M FLEX-WING MECHANICAL LEVEL LIFT ROTARY CUTTER/SHREDDER SR15 - SOM 10/01 P/N 00759799C Printed U.S.A. 00763505 FILE. SIGNED COMPLETED, SERVIS-RHINO ® SIGN.

MUST MACHINE. THIS WITHIN MAILED MUST REGISTRATION EFFECT, MAILBOX. INFORMATION REGISTRATION mailbox. CARD REGISTRATION UNTIL REFUSED SUBMITTED CLAIM PURCHASER DATE DELIVERY SIGNED, WARRANTY WARRANTY THIS IMPORTANT!

COPY LAST DROP WARRANTY drop tape, tear). BEFORE MAILING WARRANTY CARD, MAKE SURE ALL INFORMATION IS LEGIBLE SERVIS-RHINO Servis-Rhino Model Purchaser Last Name Street & No., RFD, Box, &/or Apt. City Dealer City. I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator’s Manual including safety equipment, safe operation, and maintenance, reviewed the Safety Signs on implement (and tractor if possible), shown the AEM Mower Safety Practices Video, and reviewed Purchaser’s responsibility to train his operators in safe operation. PRINT FIRMLY. REMOVE WHITE COPY FOR CUSTOMER RECORDS. SERVIS-RHINO Servis-Rhino Model Purchaser Last Name Street & No., RFD, Box, &/or Apt.

City Dealer City. I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator’s Manual including safety equipment, safe operation, and maintenance, reviewed the Safety Signs on implement (and tractor if possible), shown the AEM Mower Safety Practices Video, and reviewed Purchaser’s responsibility to train his operators in safe operation. PRINT FIRMLY. REMOVE WHITE COPY FOR CUSTOMER RECORDS.

SERVIS-RHINO Servis-Rhino Model Purchaser Last Name Street & No., RFD, Box, &/or Apt. City Dealer City.

I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Operator’s Manual including safety equipment, safe operation, and maintenance, reviewed the Safety Signs on implement (and tractor if possible), shown the AEM Mower Safety Practices Video, and reviewed Purchaser’s responsibility to train his operators in safe operation.